Build a Shoegaze Guitar Sound
A shoegaze part can keep ringing after your picking hand stops. Start with two chords you can recognise dry. Add fuzz for the grain and use delay and reverb to carry the first chord into the gap. Listen for whether you can still pick out the top note when the second chord arrives.
Apply the wash request. Hold a chord, stop the strings, then listen to what carries on. Hear A and B.

Hear two dry chords turn into a fuzz wash
Listen to the first pause. In A the strings stop and leave a gap. In B the gritty chord leaves a moving tail across that same gap. On the second chord, try to sing its highest note through the wash.
We fed the same two chords to the public BrowserTones player and matched the clips in loudness. A used a low-drive clean amp. B used a Brown amp, strong fuzz, slow chorus, a 450 ms delay and hall reverb. Several parts of the rig change together. To test the wash yourself, open the player from this page, start audio and choose Apply prompt. Then try one change from the list below in the tone field and apply it again.
Find out what is masking the chord
- The top note is missing even on the first strike. Reduce the fuzz mix or try a more open voicing. Let one upper string ring while the bass note changes.
- The first strike is clear, but the old chord hangs over the new one. Ask
Keep the fuzz. Shorten the reverb decay.
If you hear a series of distinct copies instead, ask to lower delay feedback and leave the reverb alone. - The note feels seasick. Reduce modulation depth or mix. Keep enough slow movement for the sustained chord to shift without pulling each attack away from pitch.
Keep the wash and make room for a vocal
Hold the top two strings of a chord and change only the bass note for the next chord. Sing the first line over both. If the new bass note disappears, leave the fuzz alone for one pass and shorten the reverb tail. If the vocal and guitar still fight on the very first beat, play the two upper notes alone. That comparison tells you whether to change the rig or the voicing.
Use a reference for one quality at a time
“My Bloody Valentine-style guitar” can mean a bent pitch, a blurred attack, layers of distortion or an unusually wide arrangement. Pick one of those targets and say whether the guitar is carrying a lead or sitting under a voice. Try a two-note voicing before adding more low strings. Overdubs and the way you play can contribute as much density as another effect.
For a cleaner bed under vocals, compare ambient delay and reverb. To hear why a repeat can get rougher depending on its position, use the effects-order A/B.
Try the fuzz wash in BrowserTones
By BrowserTones · Updated
