What Is an Amp Sim, and How Do You Use One?
An amp sim, short for amplifier simulator, recreates the sound-shaping behaviour of a guitar amplifier. A software amp sim processes your guitar signal on a computer, so you can play through headphones or powered speakers without a physical guitar amp.
Choose Try without a guitar for a demo, or Start playing to use your interface. The clean request is ready to apply. Hear the two examples.
Software amp sims run in a browser, a standalone application or a plugin host. You do not need recording software just to play through a browser or standalone amp. This guide helps you choose a format and get your first sound.
What an amp simulator does to your guitar sound
The signal coming straight from your guitar is often called a dry or DI signal. An amp sim processes that signal while you play. The result can range from a clear clean sound to a crunchy rhythm tone or a heavily distorted lead.
Amp simulation also exists in hardware pedals and modelers. This guide focuses on software; Universal Audio's overview describes both forms. Some products model a named amplifier, while others offer their own amp character.
A typical software guitar rig has three main elements:
- The amp shapes the sound's gain, distortion and tonal balance.
- The cabinet simulation adds the character of a guitar speaker and its recorded sound. Some cabinet simulations use an impulse response, or IR.
- The effects add changes such as modulation, delay or reverb.
These elements work together. Cabinet processing helps shape the sound you hear through headphones or studio speakers. An IR is one way to capture a speaker, microphone and acoustic response; you do not need a separate IR loader when your amp suite already supplies suitable cabinet processing. Focusrite explains amp and cabinet simulation.
Hear what an amp sim changes
What does an amp add? In A you hear the guitar recording before BrowserTones processes it. In B the same palm-muted riff goes through its high-gain amp and cabinet. Follow the first two low notes. The picking stays the same, but B gives each note a rougher edge and a longer buzz. The clips are matched in loudness.
Prefer a lighter sound? Hear the same chords through clean and crunch amps. Listen for the individual strings after the pick hits.
What you need before you play
For a typical computer setup, you need a guitar, an instrument cable, a suitable audio interface, a computer, and headphones or speakers. The interface provides an input for the guitar and converts its signal for the computer. Your listening output lets you hear what the software produces.
The interface and amp sim do different jobs: the interface gets audio into and out of the computer; the amp sim shapes its sound. An interface alone does not supply a software guitar amp tone.
Use an input intended for a guitar or other instrument-level source. Depending on the interface, its setting may be called Instrument, INST or Hi-Z. An ordinary laptop microphone socket is not an equivalent instrument input. Focusrite's instrument-input guide explains what to check.
A gap before you hear the first note is latency. Repeated notes after the first sound can be a delay effect. For the wiring and first sound check, follow How to Connect a Guitar to Your Computer.
Do you need a browser amp, standalone app or DAW plugin?
For playing without a recording project, start with a browser amp or standalone app. For processing guitar inside a recording session, choose a plugin compatible with your digital audio workstation, or DAW. A DAW is recording software that works with tracks.
| Format | Needs a DAW? | When it fits | Check before choosing |
|---|---|---|---|
| Browser amp | No | Try a sound on a website without installing an amp application. | Browser input access, interface routing and the service's connection requirements. |
| Standalone amp app | No | Play in a dedicated installed application. | Supported operating system and audio driver. |
| DAW plugin | Needs a compatible host, often a DAW | Process a guitar track inside a recording or mixing session. | Plugin format, operating system, host compatibility and licence. |
An interface may still need its manufacturer's driver or setup software, even when the amp itself runs in a browser.
VST is one plugin standard, rather than another name for every amp simulator. A host and plugin must support a compatible format. Steinberg describes this distinction in its VST3 technical overview.
An amp effect processes audio from your guitar. A virtual guitar instrument that plays notes from MIDI is a different tool, even though both may appear in searches for “guitar VST.”
If recording is your goal, a DAW lets you record a guitar track and process it with a compatible amp plugin. Capturing the output of a browser amp depends on your recording software and audio routing. Opening a browser player alone does not set up that recording path.
What changes when you turn up the gain?
Pick the same chord softly and then firmly with a clean amp setting. Now raise the amp gain, keeping the listening volume comfortable, and play it again. Listen for the edge of the chord to break up or its notes to sustain. If the guitar distorts even on a clean setting, check the interface’s input meter first: an overloaded input can distort before the signal ever reaches the simulated amp.
The three controls have different jobs: interface input gain sets the level going into the computer, amp gain shapes the tone, and headphone volume controls loudness. See Focusrite’s guide to gain and monitoring for an example of the hardware controls.
Try an amp sim free in BrowserTones
BrowserTones’ freemium offering starts with a free browser amp, cabinet processing, effects and public sound sharing. You can play the demo without signing in or installing amp software. To play your own guitar, connect a suitable audio interface.
Select Try without a guitar to hear a recorded guitar part through the amp. With your own guitar connected, select Start playing. A shared link opens someone’s settings. You choose when to start audio.
Once your input works, try a request such as:
Clean guitar with a warm tone, clear attack and a little room reverb. Keep the delay off.
Apply the sound and play a short phrase. Then try “add a little crunch” and apply the change. Listen for a change in the sound as you pick. This is a suggested starting exercise: your guitar, input level and the generated settings affect the result. BrowserTones interprets a sound description; it does not promise an exact copy of a particular amp or recording.
Can I use BrowserTones as a DAW plugin?
The browser version is available now. The paid BrowserTones VST for a compatible DAW is in development. If you want to record a take today, record your interface input on a track in your DAW. To capture the sound of the browser amp itself, you also need to route its output into the recording software.
For current BrowserTones setup answers, see the player FAQ.
Try a clean amp in BrowserTones
By BrowserTones · Updated
